- Moisture Barrier
- Easy to apply
- Non- flammable
-
Moisture Barrier
-
Easy to apply
-
Non- flammable
-
Cold applied
POLYBIT® EASYBIT is used for providing waterproofing and dampproofing for below ground concrete structures which are above the water table. The coating is also used as a moisture vapor barrier on block works and concrete surfaces prior to cladding. Available Pack: 140kg. drums
The surface shall be cleaned thoroughly of all contaminants like dust, traces of curing compound, oil, grease. All surface imperfections and protrusions are to be removed and repaired. Structurally unsound and friable concrete must be removed and repaired with a suitable
concrete repair mortar.
Stir the contents of the drum thoroughly prior to application to remove any sediment. The application can be done with a roller, brush or airless spray. Apply the coating at a coverage rate of 1-4m2/L/coat. Depending on the dry film thickness required.
Substrate must be sound, free from dust, loose particles, oil, traces of curing coampound and any contamination. May be applied to damp but not waterlogged surfaces.
This can be applied on concrete, metal, wood, cork, etc.
No. It is a water based green product with very low VOC content