Single component, hot-poured rubber asphalt compound, which cures to form a tough & flexible waterproofing membrane.
POLYBIT Bitubond N
Adhesive for bonding bitumen fiber board bitumen plastic laminates veneer boards rubber and plastic edging strips rubber leather foam to wood chipboard concrete stone metals and bitumen surfaces.
POLYBIT Bitutape Primer
A premium quality, quick drying, solvented bituminious primer conforming to ASTM D 41, used for priming pipes prior to application, pipe wrapping tape systems.
POLYBIT Easybit
Thixotropic flexible protective barrier to water and vapor transmission for below ground concrete structures which are above the water table.
POLYBIT POLYASPHALT 60/70
A penetration grade bitumen used as a paving grade bitumen used for the construction of roads and asphalt pavements. This is also used as a protective and waterproofing coating on concrete surfaces.
POLYBIT POLYCOAT RBE
Emulsified rubber modified bitumen coating, which dries to form a tough, seamless, flexible vapor proof protective coating. Conforms to the requirement of ASTMD 1227 Type lll, class 1.
POLYBIT POLYCOAT RBE 10
Emulsified rubber modified bitumen coating, which dries to form a tough, seamless, flexible vapor proof protective coating.
POLYBIT POLYCOAT RBE 1000
Emulsified bituminous coating modified with high content of Styrene Butadiene Styrene rubber, which dries to form a tough and seamless, flexible water and vapor proof protective coating.
POLYBIT POLYCOAT RBE 15
Emulsified bituminous coating modified with 10% Styrene Butadiene Styrene Rubber, which dries to form a tough and seamless, flexible water and vapor proof protective coating.
POLYBIT POLYCOAT RBE 5
Rubber modified bitumen emulsion coating, which dries to form a tough, seamless, flexible vapor proof protective coating.
POLYBIT POLYPRIME SB
A quick drying solvent based low viscosity bitumen primer. It is used as a primer coat on masonry and concrete substrates to improve the adhesion of bitumen based membranes and coatings.
POLYBIT Polycoat
Emulsified thixotropic bitumen protective coating. The coating dries to form a black flexible protective film. The finished film forms a tough barrier to vapor transmission.
