Skip to Content

POLYBIT POLYPRIME SB

Solvent based bitumen primer

  • Improves the adhesion of bitumen based sheet
    membranes and coatings
  • Cold applied, does not require heating
  • Binder for dust particles

Features and benefits

A quick drying solvent based low viscosity bitumen primer. It is used as a primer coat on masonry and concrete substrates to improve the adhesion of bitumen based membranes and coatings.

Properties

Description

POLYBIT® POLYPRIME SB is used as a primer and sealer coat prior to the application of bitumen based waterproofing membranes and coatings. Available sizes: 16L. 20L. 200L

Documents and downloads

How to use

How to use

Surface Preparation

The surface shall be cleaned thoroughly of all contaminants
like dust, traces of curing compound, oil and grease. All
surface imperfections, nail head protrusions, structurally
unsound and friable concrete shall be removed and
repaired with a suit-able Polycrete* concrete repair mortar.
The surface must be dry before priming with Polyprime SB.

Application

Mix the contents of the pail or drum for a few minutes to
remove any sediments. apply the primer @4-6 m²/L to a
clean smooth and dry surface by brush/roller. Allow the
primer to dry prior to the application of the membrane.
For highly porous surfaces application of a second coat is
recommended. 

Related articles

  • Bitustick Cool

    The Next Generation of Performed Bituminous Coatings 

  • Foundations and Flooring Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Wet Areas and Flooring Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Polycryl FR

    The Ultimate Fire Rated Coating Solution 

  • Polycryl PF

    Strong UV protection For Polyurethane Foam Roof  

  • Bituplus Ultra

    The Ultimate Torch On Membrane Range 

Related products

Related products

  • ${/content/heliux/adhesive/polybit/com/en/products/waterproofing-solutions/bituminous-membranes/product#/polybit-bitustick/SAP_0201WAP343J0/searchResult.productFields.MainImageAltText}
    POLYBIT BITUSTICK
    Self-adhesive polymer modified bituminous, waterproofing sheet membrane, laminated onto a tough HDPE film on one side and a silicone release film on the other. 
  • ${/content/heliux/adhesive/polybit/com/en/products/waterproofing-solutions/protection-membranes/product#/polybit-bituboard/SAP_0201W1P34GA5/searchResult.productFields.MainImageAltText}
    POLYBIT Bituboard
    A multi layer, asphaltic protection board manufactured by thermally bonding polymer modified bitumen with selected additives which, sandwiched between a layer of saturated fibre-glass on one side and anti-stick polyethylene liner on the other. 
Frequently asked questions

Frequently asked questions