- Improves the adhesion between bitumen based sheet membranes and coatings
- Cold applied, does not require heating
- Binder for dust particles
-
Improves the adhesion between bitumen based sheet membranes and coatings
-
Cold applied, does not require heating
-
Binder for dust particles
-
Anti corrosive
-
Conforms to the following standards
-
ASTM D 41 - Asphalt primer for roofing, damp proofing and waterproofing
POLYBIT® BITUTAPE PRIMER provides an effective primer coat prior to application of anti–corrosive pipe wrapping tapes. BITUTAPE PRIMER is resistant to concentrations of alkalis and acids and can withstand prolonged oxidation. Available pack size: 20L .
Surfaces must be structurally sound, clean, dry and free from dirt, dust, oil, grease, curing compounds, laitance and
loose debris. Steel surfaces should be free from scale and rust and preferably cleaned by grit blasting or rotary wire
brush.
Bitutape Primer is ready to apply and only require slight manual stirring prior to application. Bitutape primer is
usually applied straight from the pail/ drum with standard brush, squeegee or airless spray equipment at an average
coverage rate of 4-6 m²/L allow primer to dry before application of Bitutape moulding paste or Bitutape pipe
wrapping tapes.
It is a fast drying solvent based bitumen primer
Yes. It is compatible with Bitutape range pipe warpping tapes
Yes. It contains flammable solvents