Skip to Content

POLYBIT POLYCOAT RBE 5

SBS modified bituminous coating

  • Cold applied
  • single component easy to apply
  • can be applied on damp substrates

Features and benefits

Rubber modified bitumen emulsion coating, which dries to form a tough, seamless, flexible vapor proof protective coating.

Properties

Description

POLYBIT® POLYCOAT RBE 5 is used as a protective coating for cladding works to prevent infiltration of vapour and moisture into the building structure. Available sizes: 200L

Documents and downloads

How to use

How to use

Surface Preparation

The surface shall be cleaned thoroughly of all contaminants
like dust, traces of curing compound, oil, grease. Light
mechanical grinding/grit blasting/high pressure water jet
may be used to clean the surface of all the contaminants
depending on the degree of contamination on the surface
to be coated

Application

It is highly recommended to apply a priming coat prior
to the application of the Polycoat RBE 5 coating on the
substrate. The primer can be prepared in the site by diluting
Polycoat RBE 5 with 20% water. Apply the rubberized bitumen coating
@1–4m²/L/coat. On vertical areas, it is recommended
to apply the coating in multiple layers 

Finishing

Care shall be taken to ensure that the first coat is not punctured during the application of the second coat. However, if the coating is damaged, the area can be readily over coated provided the surface preparation is done properly 

Related articles

  • Bitustick Cool

    The Next Generation of Performed Bituminous Coatings 

  • Foundations and Flooring Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Wet Areas and Flooring Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Polycryl FR

    The Ultimate Fire Rated Coating Solution 

  • Polycryl PF

    Strong UV protection For Polyurethane Foam Roof  

  • Bituplus Ultra

    The Ultimate Torch On Membrane Range 

Related products

Related products

  • ${/content/heliux/adhesive/polybit/com/en/products/mortars-and-auxiliaries/concrete-repair/product#/polybit-polycrete-st/SAP_0201VLP34GH1/searchResult.productFields.MainImageAltText}
    POLYBIT Polycrete ST
    Polymer modified high strength cementitious repair mortar. Polymer modified repair mortar, specially formulated by blending OPC with non shrinking additives, fibers, polymers and fillers for repairing of beams, columns and slabs. 
  • ${/content/heliux/adhesive/polybit/com/en/products/mortars-and-auxiliaries/concrete-repair/product#/polybit-polycrete-fc/SAP_0201VLP34GG9/searchResult.productFields.MainImageAltText}
    POLYBIT Polycrete FC
    Polymer modified cementitious fairing coat single component polymer modified fairing coat designed to fill pores, blowholes, minor honeycombs on a concrete surface. 
  • ${/content/heliux/adhesive/polybit/com/en/products/waterproofing-solutions/protection-membranes/product#/polybit-bituboard/SAP_0201W1P34GA5/searchResult.productFields.MainImageAltText}
    POLYBIT Bituboard
    A multi layer, asphaltic protection board manufactured by thermally bonding polymer modified bitumen with selected additives which, sandwiched between a layer of saturated fibre-glass on one side and anti-stick polyethylene liner on the other. 
Frequently asked questions

Frequently asked questions