- Excellent resistance to the attack of salts present in underground water, dilute acids, alkalis, chlorides and sulphate ions.
- Good adhesion to most surfaces, like concrete, metal, wood, cork.
- Easy to apply
-
Excellent resistance to the attack of salts present in underground water, dilute acids, alkalis, chlorides and sulphate ions.
-
Good adhesion to most surfaces, like concrete, metal, wood, cork.
-
Easy to apply
-
Cold applied
-
Asbestos free
-
economical
POLYBIT® POLYCOAT FBR is a high build bitumen emulsion based protective coating, manufactured to comply with ASTM D 1227 Type 11, Class 1. It is a blend of carefully selected bitumen and non-asbestos fibres. The coating is dark brown in color, which dries to form a tough black flexible film. The system complies with the requirements of BS 8102:1990.
Ensure that all surfaces that are to be treated are
sound and free from oil, grease, cement laitance
and loosely adhering particles. If required light
mechanical grinding or wire brushing is
recommended.
All surfaces are to be primed with POLYPRIME WB
prior to the application of POLYCOAT FBR, as this
will assist brushing and rolling of the heavier
bodied product and will ensure a more readily
achieved even coverage. The primer can be
applied by brush, roller or squeegee
Thoroughly mix the contents of the drum so that
the fibres are uniformly dispersed in the coating.
POLYCOAT FBR can be applied by brush or trowel.
Application of 2 coats will give a total Dry Film Thickness of 1mm. The second coat
should be applied only after the first coat has dried completely.
The coating shall be protected with BITUBOARD protection boards.
Substrate must be sound, free from dust, loose particles, oil, traces of curing coampound and any contamination. May be applied to damp but not waterlogged surfaces.
Recommended appication temperature range is 5 to 55°C
No. It is a water based green product