- Easy to apply
- Cold applied
- Water-based and therefore is non-toxic
-
Easy to apply
-
Cold applied
-
Water-based and therefore is non-toxic
-
Adheres to concrete, metal, wood, cork, etc
-
Asbestos free, odorless and can be applied in closed or confined spaces.
-
Conforms to ASTM D 1227, Type III, Class 1.
POLYBIT® Polycoat WB is an emulsified thixotropic bitumen protective coating. The coating dries to form a black flexible protective film. The finished film forms a tough barrier to vapor transmission.
The surface shall be cleaned thoroughly of all contaminants like dust, traces of curing compound, oil and grease.The primer coat can be made in the site by diluting the same bitumen emulsion with 20% water. The primer may be applied by a brush, roller or airless spray. Allow the primer to dry before any further coats are applied.
Stir the contents of the drum thoroughly prior to application to remove any sediment. The application can be done with a roller, brush or airless spray. Apply the coating at a coverage rate of 1-4 m2/L./coat, depending on the dry film thickness required. When applied at 4m2/L./coat, the dry film thickness achieved will be 125 microns.
The coating shall be protected from ongoing site activities and during backfilling from getting damaged by a 150 micron polyethylene sheet.