- Easy to use non slumping
- good impact resistance
- nor primer or bonding agent required
-
Easy to use non slumping
-
good impact resistance
-
nor primer or bonding agent required
-
high compressive strength
POLYBIT® POLYPOXY NF 2000 easy to use non-flowing, sand filled two component epoxy compound which can be used for bedding, gap filling, repair and adhesive applications.
Available size: 3KG
Clean all the surfaces and remove any loose particles, laitance, dust, oil, grease, paint etc. Abrade
the bond area to improve mechanical bond.
POLYPOXY NF Part A and Part B shall be mixed thoroughly using a trowel or gloved hand until a uniform color and consistency is achieved. For small mixes, ensure that both the parts are mixed as per
the ratio of 60:40 (A:B).
Application can be carried out by putty knife, trowel or wooden float. Press firmly to ensure proper adhesion and full contact. Additional build up can be
done by multiple layer application. Thickness can
be from 0mm – 5 mm. The application of additional
layers should follow between 8 – 24 hours after the
first application.
No primer required
It can be applied up to 5mm/layer
3 kg kit can cover approximately 1.6 sqm at 1mm thickness