Skip to Content

POLYBIT Polypoxy CT

Bitumen Modified Epoxy Coating

  • Excellent chloride &sulphate resistance
  • High build coating no rpimer required
  • abrasion resistant

Features and benefits

A two component bitumen modified liquid epoxy resin coating. high build, dense, coating designed to protect concrete and metal structures

Properties

Description

POLYBIT® POLYPOXY CT To provide protection to concrete and metal structures such as:- concrete foundation steel pipes & ferrous metals off shore and marine structures. Available sizes: 20L

Documents and downloads

How to use

How to use

Surface Preparation

Surface to be coated with Polypoxy CT should be
structurally sound, dimensionally stable, clean and free
from laitance, oil or any other contaminants. Grit blasting
is recommended for complete removal of deleterious
materials and other contaminants which will affect the
adhesion from the substrate.

Mixing

Mix part A and part B separately for a minute and then
transfer Part B (reactor) to Part A (base) and mix thoroughly
for 2 –3 minutes to get a uniform homogenous consistency.
Use a slow speed electric drill with a proprietary mixing
paddle 

Application

Polypoxy CT can be applied by brush, short hair roller
or airless spray. Apply the mixed material to a properly prepared substrate to achieve a uniform coating with
minimum wet film thickness of 200 microns. Subsequent
coats shall be applied after the coating achieves its initial
cure. 

Related articles

  • Bitustick Cool

    The Next Generation of Performed Bituminous Coatings 

  • Foundations and Flooring Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Wet Areas and Flooring Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Polycryl FR

    The Ultimate Fire Rated Coating Solution 

  • Polycryl PF

    Strong UV protection For Polyurethane Foam Roof  

  • Bituplus Ultra

    The Ultimate Torch On Membrane Range 

Related products

Related products

  • ${/content/heliux/adhesive/polybit/com/en/products/waterproofing-solutions/epoxy-coatings-special-liquids/product#/polybit-polypoxy-cr/SAP_0201WUP34GK1/searchResult.productFields.MainImageAltText}
    POLYBIT Polypoxy CR
    Solvent free high build epoxy resin protective coating which provides a chemical resistant surface for concrete and steel. 
  • ${/content/heliux/adhesive/polybit/com/en/products/flooring-solutions/flooring-primers/product#/polybit-polyprime-ep/SAP_0201TNP34GL4/searchResult.productFields.MainImageAltText}
    POLYBIT Polyprime EP
    It is a two component solvent free epoxy resin based primer and sealer for epoxy and polyurethane based coatings and toppings. It can also be applied as a scratch coat with the addition of graded quartz sand. 
  • ${/content/heliux/adhesive/polybit/com/en/products/waterproofing-solutions/pu-coatings-special-liquids/product#/polybit-polyguard-pu/SAP_0201WVP34VA3/searchResult.productFields.MainImageAltText}
    POLYBIT Polyguard PU
    A2 component UV stable polyurethane protective coating system. The coating provides a seamless chemical and abrasion resistant coating to cured epoxy systems, metal and concrete surfaces both internal and external. 
Frequently asked questions

Frequently asked questions