- Highly durable
- Excellent flexural and elastomeric properties.
- High UV resistance and resistance to long term weathering effects.
-
Highly durable
-
Excellent flexural and elastomeric properties.
-
High UV resistance and resistance to long term weathering effects.
-
Available in various colors. Low maintenance cost.
-
Excellent barrier to various chemicals like CO2, chloride ions, sulphates, oxygen, water and other aggressive contaminants
-
Breathable and can allow moisture vapor to escape from the structure
POLYBIT® POLYGUARD 101 can be used as a protective coating for exposed concrete structures such as bridge decks, tunnels, reinforced fill panels, marine and coastal structures from chloride ions, sulphates, carbon dioxide and water, used to protect other cementitious and masonry substrates from aggressive marine and coastal environment. Available sizes: 20L.
The application temperature should be between 5°C to
45°C. Application procedures may vary slightly depending
upon site conditions. The general recommended guidelines
for the application of the coating system is as follows:
The surface must be structurally sound and free of oil,
grease, dust and other contaminants which will affect
the bonding.
Apply a penetrative primer coat of Polyxane* to the
prepared dry surface. For best results apply the
primer @ 4-5 m²/L/coat. The first coat of Polyguard 101 is to be applied on the dry primer at the rate of 2.5 m2/L for 200 microns D.F.T. the
coating can be applied with a brush, roller or an airless
spray
Apply the second coat at right angles to the first coat at the
same rate. The second coat is to be applied only after the
first is completely dry.
Allow the coating to cure for a period of 7 days to achieve
its full properties
Yes. Solvent free epoxy based primer to be used
It can be applied at a range of 4 to 20mm in single lay.
Yes. This product is highly abrasion resistant