- Waterproof
- Easy application and cleaning
- Chemical resistance and mechanical attack
-
Waterproof
-
Easy application and cleaning
-
Chemical resistance and mechanical attack
-
Vertical slip resistance
-
Internal and external applications
CERESIT® CE 47 is a Two-component, chemical-resistant epoxy mortar for installation and grouting of tiles and stones. For the chemically and permanently resistant installation and grouting of ceramic tiles and stones, acid-resistant bricks, split
tiles, chipboards, porcelain, clinker slabs and synthetic resin
bonded slabs (Agglo marble etc). For installation and grouting
ceramic coverings in areas exposed to aggressive substances, e.g. in therapeutic baths, dairies, industrial kitchens, battery rooms, car washes, breweries, silos, animal housing, swimming pools, laboratories, spas, saunas and steam baths. For indoor and outdoor use, in permanently wet area sand brackish water.
Add the hardener (component B-catalyst) contained in the plastic bag to the resin (component A) and mix with a low speed electric drill and stirrer (approx. 400 rpm) until the mixture is completely free of lumps. Scrape the sides and the bottom of the container, using a steel spatula, to make sure that all the paste is catalyzed.Hand mixing is not recommended. The two parts are pre-batched. Do not add water or solvents to improve workability.
CERESIT CE 47 is applied using the thin-bed method. The notch size of the trowel must be adapted to the respective tile or stone format in accordance with the local norms.Apply the CE 47 mixture with an epoxy grouting board to the dry and clean ceramic coverings, filling the joints completelyand without any cavities. Then remove any excess material by skimming it diagonally off the tile surface.
The grout work must be cleaned and finished while the product is still wet and in any case in the shortest possible time. Take care not to remove product from the joints or leave stains on the tile surface.