Skip to Content

POLYBIT Bitumastic

Bitumen rubber mastic sealant

  • Flexible joint sealant
  • Stability at high ambient temperatures
  • Excellent adhesion, strong durable bond

Features and benefits

Bitumastic is a single component, solvent based bitumen rubber mastic joint sealant.

Properties

Description

POLYBIT® BITUMASTIC is a single component, solvent based bitumen rubber mastic joint sealant. The sealant on curing forms a tough and flexible seal. It has excellent adhesion to concrete, brickwork, asphalt and most construction material substrates. The mastic sealant is modified with non asbestos fibres to make the sealant thixotropic and slump free when applied on vertical areas. Available Pack: 20KG/PAIL

Documents and downloads

How to use

How to use

Surface Preparation

Surface must be free from all dirt, dust and loose material. Any oil and grease contamination must be removed completely. The surface must be made dry prior to the application of the sealant.

Priming

Under normal circumstances priming is not required. However, for very dry and porous surfaces, it is recommended to apply one coat of a solvent based bitumen primer (Polyprime SB)*. Similarly for joints subjected to continuous immersion, priming is recommended. 

Application

The sealant can be applied by means of a spatula or trowel. As the product is solvented, it is recommended to mix the contents of the pail with a paddle mixer for a few minutes prior to the application to ensure a homogenous mix. Sealant application should start form the bottom of the joint/groove and continued to the top. Immediately tool the joint with the spatula or putty knife to smoothen and compress the sealant to effect total contact with joint surfaces. The putty knife shall be moistened with a cleaning solvent to prevent the sealant to adhere to the knife and ensuring a smooth and neat finish. Where masking tape has been employed to keep building surfaces clean, it is advisable to remove them at the moment the sealant filling is completed. 

Related articles

  • Bitustick Cool

    The Next Generation of Performed Bituminous Coatings 

  • Foundations and Flooring Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Wet Areas and Flooring Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Polycryl FR

    The Ultimate Fire Rated Coating Solution 

  • Polycryl PF

    Strong UV protection For Polyurethane Foam Roof  

  • Bituplus Ultra

    The Ultimate Torch On Membrane Range 

Related products

Related products

  • ${/content/heliux/adhesive/polybit/com/en/products/waterproofing-solutions/bitumen-thin-coatings/product#/polybit-polyprime-sb/SAP_0201WEP345J0/searchResult.productFields.MainImageAltText}
    POLYBIT POLYPRIME SB
    A quick drying solvent based low viscosity bitumen primer. It is used as a primer coat on masonry and concrete substrates to improve the adhesion of bitumen based membranes and coatings. 
  • ${/content/heliux/adhesive/polybit/com/en/products/waterproofing-solutions/bituminous-membranes/product#/polybit-bitustick/SAP_0201WAP343J0/searchResult.productFields.MainImageAltText}
    POLYBIT BITUSTICK
    Self-adhesive polymer modified bituminous, waterproofing sheet membrane, laminated onto a tough HDPE film on one side and a silicone release film on the other. 
  • ${/content/heliux/adhesive/polybit/com/en/products/waterproofing-solutions/bitumen-tom-membranes-primers/product#/polybit-bituplus-e-4200/SAP_0201WBP343F9/searchResult.productFields.MainImageAltText}
    POLYBIT BITUPLUS E 4200
    Bituminous waterproofing membrane manufactured by blending a mixture of bitumen and SBS (Styrene Butadiene Styrene) polymers to obtain excellent waterproofing and low temperature flexibility properties. 
Frequently asked questions

Frequently asked questions