- Non staining.
- Non hazardous, nontoxic.
- Ensuring fair faced concrete.
-
Non staining.
-
Non hazardous, nontoxic.
-
Ensuring fair faced concrete.
-
Suitable for all types of form work
POLYBIT® POLYRELEASE WB Can be applied on moulds such as timber, plywood, steel, GRP, etc. Ensures high quality fair faced stain free concrete and easy stripping of moulds. Available pack size: 200L.
Surface of forms/shutter shall be clean and rust free. All traces of adherent materials in the form work must be
removed prior to use.
Polyrelease WB may be applied by fine brush or conventional mould oil sprayer ensuring
a light continuous film. Excessive application should be avoided. In case of new timber/plywood, an initial spray
coat may be required to seal the pores on the surface.
Polyrelease WB on application to the surface shall be kept
undisturbed till it dries fully. In hot climates it dries within 15 – 30 minutes but at low temperatures and high humidity 1
to 2 hours might be required.
It is a warter based mould release agent
Yes. It is chlorine free
Yes. It is compatible with plywood, metal, plastic, GRP, GRC etc.