Skip to Content

POLYBIT Polystop

Internal and external PVC waterstop

  • High tensile strength & elongation
  • Non toxic.
  • Excellent chemical resistance

Features and benefits

High grade PVC resin extrusions that are plasticized and stabilized to offer long life performance in concrete structures against water leakages.

Properties

Description

POLYBIT® POLYSTOP waterstops are used in conjunction with expansion and construction joints in RCC structures. water reservoirs, storage tanks, retaining walls, basements, foundations, subways, tunnels etc.

Documents and downloads

How to use

How to use

Fixing Internally

Internal and centrally placed waterstops are positioned within the concrete where the centerline of the waterstop is aligned with the centre of the joint. Such waterstops functions as a watertight diaphragm wall against any water leakage. For a proper placement of the waterstop, split formwork is recommended when installing in slabto-slab, slab-to-wall and wall-towall joints. The waterstop is then tied with wires trough the eyelets provided at the end flanges to the reinforcement. This will ensure that the waterstop firmly held in position and is not misaligned or fold during the concrete pour. One half of the waterstop has to be positioned within the first pour and the other half projecting into the second pour. A tight fit between the waterstop and the form is also necessary to prevent excessive leakage of concrete paste, which could lead to honeycombing of the concrete.

Fixing externally

The externally placed waterstop is installed prior to pouring of concrete. The external expansion joint profile is usually loosely laid on top of the compacted grade or mudslab. The stop end form works are then fixed on top of the waterstop. The waterstop can either be nailed or glued into position to avoid displacements during the concrete pour. The external construction joint profile is glued or nailed on to the vertical shutter. The waterstop is so positioned that only the ribbed side is embedded into the concrete. 

Jointing

A fully continuous water stop network must be formed throughout. At bends and additional joints, factory welded junctions are to be used when jointing with the placed water stops. Field buttsplices shall be heat fused welded using an appropriate welding knife of voltage ranging between 220- 240V(ideally with thermostatically controlled). The edge of the water stop shall be cut with a knife to get an even and sharp finish and aligned in a specially designed fixing jig. The edges will then be positioned in the jig in such a fashion that at least 25mm of water stop protrudes from the jig. Place the welding knife in between the two ends, and when the PVC starts melting (>140°C), beads will start forming around the section. remove the welding knife and press both the ends firmly against each other to form a neat buttsplice. Press the joints against each other for sometime till the PVC cools and forms a strong fusion welded joint. 

Related articles

  • Bitustick Cool

    The Next Generation of Performed Bituminous Coatings 

  • Foundations and Flooring Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Wet Areas and Flooring Systems

    Discover, feel and touch our systems, through our mockup simulation boxes 

  • Polycryl FR

    The Ultimate Fire Rated Coating Solution 

  • Polycryl PF

    Strong UV protection For Polyurethane Foam Roof  

  • Bituplus Ultra

    The Ultimate Torch On Membrane Range 

Related products

Related products

  • ${/content/heliux/adhesive/polybit/com/en/products/waterproofing-solutions/wp-others/product#/polybit-hydroseal-p/SAP_0201WYP344Y7/searchResult.productFields.MainImageAltText}
    POLYBIT HYDROSEAL P
    Swellable water bar used for the purpose of sealing joints. 
Frequently asked questions

Frequently asked questions